A HorizonCube is selected from the OpendTect Processing Menu (Processing > HorizonCube > Select ...). The HorizonCube Selection dialog pops up (see below). In this window, one HorizonCube is selected at one time. Once a HorizonCube is selected and loaded in to the memory, it can be displayed on the element (e.g. Inline/Crossline/2D Line) on which it has been computed.
HorizonCube Selection
A HorizonCube display on a selected inline
A HorizonCube can be displayed on-the fly on a section (inline, crossline or 2D Line). This is done by selecting a stored HorizonCube and displaying it via the OpendTect Tree. For instance, display an inline in the scene, and right click on the inline number to select the "Add HorizonCube display" option.
HorizonCube display options
Launch the HorizonCube Properties.
From the tree, right-click on the displayed HorizonCube and select 'Options', a new dialog appears as shown below:
In the above window, you can change the line styles (fill/ single color display), spacing between horizons, line width. Importantly, a slider (top of bottom) is also available to slide the horizons. For instance, if you have displayed thick horizon lines and you want to see that how the layers are developed, you can move the slider within same window. The horizontal resolution option will increase or decrease horizontal smoothing according to the selected traces.
